水泥防撞墻模具一米、兩米、三米的設置有效的滿足了對施工單位提出的技術要求，

不同長度的防撞墻模板在使用材質以及連接方式上都會有些區別，比如長度1米的防

撞墻上下拉桿數量各為1個，而長度2米的則設置為2個，這樣做的目的就是既不浪費

資源，也要保證模板的固定程度。

水泥防撞墻模具的使用需要有豐富的一線工人來操作，因?yàn)榉雷矇Φ纳a(chǎn)看似簡單，

但是在模板組裝、拆卸、澆筑混凝土的過程中都是存在技巧的，比如震動深淺、時間

、振動棒大小等，模板連接方式、使用的連接工具等等，這些都是在多次模板制作中

總結出來的，如果是單純的生產鋼模具廠家，在生產該模具的時候還是需要下功夫的

The setting of one meter, two meters and three meters of cement anti-

collision wall molds effectively meets the technical requirements put

forward to the construction unit. There will be some differences in the

use of materials and connection methods for anti-collision wall molds of

different lengths. For example, the number of lower tie rods of anti-

collision wall with a length of 1m is 1, while that of anti-collision wall

with a length of 2m is 2. The purpose of this is not to waste resources,

The fixing degree of formwork shall also be ensured.

The use of cement

anti-collision wall molds requires rich front-line workers to operate,

because the production of anti-collision wall seems simple, but there are

skills in the process of formwork assembly, disassembly and concrete

pouring, such as vibration depth, time, vibrator size, formwork connection

mode, connection tools used, etc., which are summarized in many formwork

production, If it is a simple steel mold manufacturer, it still needs to

work hard when producing the mold.